13
SHOCK ADJUSTMENT
a
a. Use the included shock clips to adjust for spring pre-load. Pressing the entire car down, release, and the car should returm to
ride height (indicated on set-up page). More pre-load clips will produce higher ride height, and less clips will produce lower ride
height. Amount of clips used to front and rear shocks can be different, but clips should be the same for the left and right.
a.
Hard Suspension
14
BODY CUTTING
6mm
4mm
2mm
1mm
It is recommended to cut
the window opening out
to let cool air in for good
circulation.
Soft Suspension