Software Installation; Windows 98/Me/2000/Xp Utility And Driver Installation - TRENDnet TEW-229UB User Manual

SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the
.
Wireless USB Adapter

Windows 98/ME/2000/XP Utility and Driver Installation

1. Insert the Wireless USB Adapter Driver & Utility CD-ROM
into computer's CD-ROM Drive and it will automatically run a
setup menu and install the driver and the utility. In some specific
setting on Windows system, you may need to proceed the
software manually, go to your Windows Start menu and choose
Run, type "D:\Autorun.exe" in the dialog box (D:\ will depend
on where your CD-ROM drive is located) and click OK.
2. If you need to install the driver manually, refer each Windows
OS to the following CD-Rom directory path:
Windows XP: D:\Drivers\Windows XP\netv558.inf
Windows 2000: D:\Drivers\Windows 2000\netv558.inf
Windows Me: D:\Drivers\Windows Me\netv558.inf
Windows 98: D:\Drivers\Windows 98\netv558.inf
Note: (D:\ will depends on where the CD-ROM drive is located).
7
3. Then select Install Software on the menu to install the driver
and the Wireless Configuration Utility.
The installation program will help you to
setup the Wireless Configuration Utility.
Be noted that the Windows XP have its
own Wireless Utility; you can either use
the utility of Windows XP or the provided
utility.
Note: When install the software before plugging the WLAN USB Adapter into the
computer; it will install the driver automatically to the Windows system.
4. Follow the procedure of the installation program.
5. After finish the installation, plugged in the
Wireless USB Adapter, you will see the
icon on right side bottom of the Windows
task bar, it may appears two colors that
means as follow:
Blue Color icon
connecting with another wireless device or AP
successfully.
Red Color icon
connecting to any wireless station or AP.
: means the WLAN USB Adapter is
: means the WLAN USB adapter is not
8