Samsung SNT-1010 User Manual page 38

Setting Up
Event Configuration
To set video signal loss detection function
You can set an alarm to be generated when the video signal from a camera to SNT-1010 is lost.
<Video Loss Function> : <Enable> activates the video signal loss detection function while
<Disable> disables the function.
<Activation Time> : You can set the time to accept a video signal loss detection to take an action.
- <Always> : Always conducts the <Action> setting when a video signal loss is detected.
- <Only Scheduled Time> : Conducts the <Action> setting for a video signal loss detection only when it occurs
during the specified time period on the specified day of the week.
<Action> : You can set an operation to be conducted when a video signal loss is detected.
- <Alarm Output> : Determines a video signal loss detection output port to which the alarm signal is to be sent.
- <Output Duration> : Determines the period of time to output the alarm signal to the specified alarm output port
when a video signal loss is detected.
- <Alarm Image Transfer> : If <On> is selected, a JPG image is transmitted through FTP or EMail (SMTP)
according to the <EVENT>
The Start Time must be prior to and must differ from the End Time.
Note
If the <Video Format> options of the <VIDEO1> and <VIDEO2> are all set to <MPEG4> in <BASIC CONFIGURATION>
Notice
<VIDEO>, the image transmission function is not available.
If the system time is not set in the <SYSTEM>
74
(Continued)
Click <EVENT> <VIDEO
LOSS>.
The VIDEO LOSS window appears.
<TRANSFER SETUP> settings.
<DATE/TIME>, the image transmission function is not available.
To set scheduled transmission
You can have a JPEG image sent through FTP or email periodically.
<Schedule Transfer Function> : <Enable> activates the scheduled transmission function,
while <Disable> disables the function.
<Transfer Interval> : You can set the time interval to transmit images. You can select a unit
of time from <SECONDS> or <MINUTES>. You can set the time
interval so that an image is transmitted every 15/30/45/60 seconds or
5/15/30/45/60 minutes.
<Transfer Time> : You can set the time to execute the scheduled transmission function.
- <Always> : Always transmits images according to the specified interval.
- <Only Scheduled Time> : Transmits images according to the specified interval during the specified time period
on the specified day of the week.
If the <Video Format> options of the <VIDEO1> and <VIDEO2> are all set to <MPEG4> in <BASIC CONFIGURATION>
Notice
<VIDEO>, the image transmission function is not supported.
If the system time is not set in the <SYSTEM> <DATE/TIME>, the image transmission function is not supported.
The Start Time must be prior to and must differ from the End Time.
Note
Click <EVENT> <SCHEDULE
TRANSFER>.
The SCHEDULE TRANSFER window
appears.
75