JVC TM-H1700GU - Color Monitor Instructions Manual page 12

HOW TO USE THE MENU
FUNCTIONS
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• PICTURE SUB ADJ.
• H. POSITION
• V. POSITION
Notes:
● Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set
separately depending on the signal (Input A (VIDEO), Input B (VIDEO) or Input B (Y/
C)) selected with the input select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
● WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature
value.
Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.
● INPUT REMOTE is shown when REMOTE SYSTEM is set to MAKE.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
CHROMA MENU
PHASE
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
CHROMA CONTRAST
PHASE BRIGHT
PICTURE SUB ADJ.
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
REMOTE SYSTEM
INPUT REMOTE
3. Press the VOLUME/SELECT buttons to set.
VOLUME/SELECT
10
(cont'd)
• WHITE BALANCE
• CONTROL LOCK
• STATUS DISPLAY
The <SET-UP MENU> screen is displayed.
A selection mark (4) is put next to the selected item.
Front panel Function
button displayed
CHROMA/
PHASE
CONTRAST/
BRIGHT
Front panel Function
button displayed
+
VOLUME/
4
SELECT (+)
CUTO
–
VOLUME/
SELECT (–) 1
DRV
Notes:
● For WHITE BALANCE items, select the CUT OFF or DRIVE
setting screen, then select the function display for adjustment.
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
• REMOTE SYSTEM
• INPUT REMOTE
Contents
Forward selection mark ( 4 )
4
Reverse selection mark ( )
Contents
Increase (to max. value)
Forward the setting value
Selects CUT OFF setting screen
Decrease (to min. value)
Reverse the setting value
Selects DRIVE setting screen
<SET-UP MENU> screen
1
<SET-UP MENU>
4 PICTURE SUB ADJ.
H. POSITION :
V. POSITION :
WHITE BALANCE
CONTROL LOCK : OFF
STATUS DISPLAY : ON
REMOTE SYSTEM : MAKE
INPUT REMOTE : A – B
2
EXIT
CHROMA CONTRAST VOLUME/SELECT
PHASE BRIGHT
<Front panel buttons>
1
Selection mark (4): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
Forward the menu item.
Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
4 Forward the setting value.
1 Reverse the setting value.
Exit the <SET-UP MENU>
EXIT
screen.
DRV Selects DRIVE adjustment.
Selects CUT OFF
CUTO
adjustment.
Adjusts red and blue
RB
signal level.
Adjusts red, green and
RGB
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
00
00
3
4
MENU