OPERATION INSTRUCTIONS
MOWING INSTRUCTIONS:
CAUTION
1. Start engine and set throttle at full speed.
2. Set desired cut height.
3. Release park brake.
CAUTION
4. Engage mower blades.
5. Move control levers in and operate per the control
instructions on Page 18.
STOPPING INSTRUCTIONS:
1. Turn mower blades off.
2. Move control levers to outboard position.
3. Set parking brake.
4. Move throttle control to slow. Allow engine to run
a short time to cool down then turn ignition key to
"OFF" and remove key.
Be sure that deflector is properly
installed on the discharge chute.
Check the area to assure there is
no one near.
25