Mjpeg - TP-Link TL-SC3430 User Manual

7.2.4 MJPEG

Viewer Authentication:
On: If the viewer authentication is On, the users will be requested to key-in username and
password when using QuickTime Player to have live viewing.
Off: If the viewer authentication is Off, you can have live viewing on computer by QuickTime
Player after entering "rtsp://ip:port/video.mjpg" on the URL column directly.
Multicasting streaming (if it's on):
Multicast Address: Specify the multicast server address.
Video / Audio Port: Specify the transmission port number of the video data, from 1024 to
65535.
Time to Live: Set the maximum TTL that multicast can pass through.
Note:
Time To Live option determines the maximum length of time (measure as the number of network routers
that can be passed before data arrives at its destination or is dropped) within which a multicast packet
must reach its destination.
Image Size: Specify the image size when the network camera transmits. Choose among 1280 x
1024, 1280 x 720, 640 x 480, and 320 x 240.
Frame Rate: Set the frame rate of the MJPEG image. Choose one among 1, 2, 3, 4, 5, 7, 10,
15, 20, 25, and 30 fps. The unit "fps" stands for "frames per second".
Note:
The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480. However, if you would like
choose frame rate over 15 fps, the IMAGE SIZE of H.264/MPEG-4/MJPEG setting page has to been
35