Ip Filter - TP-Link TL-SC3430 User Manual

Note:
When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and
password and do not protect video and audio. When enable HTTPS with RTSP off mode, the IP Camera
will protect all setting including video and audio.

7.4.3 IP Filter

IP Filter provides the function of controlling the range of IP address, similar with firewall service. This
feature can only be applied to the users with the right of Operator or Viewer except the Admin users.
IP Filter: Select if you would like to have IP filter function.
Allow Range: The default range is from 0.0.0.0 to 255.255.255.255. Enter the "Start IP
address" and "End IP address" in the range, then you can add a new allow range in allow range
54