Canon 2486B001 Instruction Manual page 67

CHECK THE INPUT
- The DV cable is not correctly connected to the DV terminal (
off.
- The video input signal is in a different television system (PAL or SECAM).
CONDENSATION HAS BEEN DETECTED
- Condensation has been detected in the camcorder (
CONDENSATION HAS BEEN DETECTED REMOVE THE CASSETTE
- Condensation has been detected in the camcorder (
COPYRIGHT PROTECTED DUBBING RESTRICTED
- You attempted to dub a copyright protected tape (
COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED
- You attempted to play back a copyright protected tape (
HEADS DIRTY, USE CLEANING CASSETTE
- Video heads are dirty. Clean the video heads (
INCORRECT TAPE SPECIFICATION PLAYBACK IS RESTRICTED
- You attempted to play back a tape recorded in a different television system (PAL or SECAM) or in a recording
standard not supported by this camcorder.
INPUT SIGNAL NOT SUPPORTED
- The digital device connected with the DV cable is incompatible with the camcorder.
REMOVE THE CASSETTE
- Camcorder stopped operating to protect the tape. Remove the cassette and reinsert it (
SET THE TIME ZONE, DATE AND TIME
- You have not set the time zone, date and time. This message appears each time you turn the power on until
you set the time zone, date and time (
TAPE END
- Tape reached the end. Rewind the tape or replace the cassette.
THE TAPE IS SET FOR ERASURE PREVENTION
- Cassette is protected. Replace the cassette or change the position of the protect switch (
49), or the connected digital device is turned
69).
69). Remove the cassette.
52).
52).
2).
24).
27).
67).
65