Setting The Date And Time; Getting Ready To Start Recording; Opening The Lens Cover And Adjusting The Lcd Screen - Canon 2486B001 Instruction Manual

Setting the Date and Time

FUNC.
( 22)
1
Open the date and time setup
screen.
FUNC. [ MENU]
[ DATE/TIME SETUP]
[DATE/TIME]
Blinking arrows will be displayed
around the first field of the date.
2
Change each field of the date and
time with the joystick (
move ( ) to the next field.
3
Press ( ) to start the clock.
4
FUNC.
Press to close the menu.
NOTES
You can also change the date format
( 61).

Getting Ready to Start Recording

Getting Ready to Start
Recording
Opening the Lens Cover and Adjusting
the LCD Screen
Before you start recording, open the
lens cover.
) and
Move the lens cover switch down to
to open the lens cover.
Rotating the LCD Panel
Open the LCD panel 90 degrees.
You can rotate the panel 90 degrees
downward.
180°
90°
You can rotate the panel 180 degrees
toward the lens (allowing the subject to
monitor the LCD screen while you use
the viewfinder). This is the only case
where you can use the viewfinder and
25