Maintenance/Others - Canon 2486B001 Instruction Manual

Additional Information
Lithium Button Battery
WARNING!
• The battery used in this device may
present a fire or chemical burn hazard
if mishandled.
• Do not disassemble, modify, immerse
in water, heat above 100 °C (212 °F) or
incinerate the battery.
• Backup battery: Replace with a CR1616
battery made by Panasonic, Hitachi
Maxell, Sony, Toshiba, Varta or Renata.
Use of other batteries may present a risk of
fire or explosion.
• Lithium battery for the wireless
controller: Replace with a CR2025
battery made by Panasonic, Hitachi
Maxell, Sony, Sanyo, or with
Duracell2025. Use of other batteries
may present a risk of fire or explosion.
• Do not insert the battery into the
mouth. If swallowed, seek medical
assistance immediately. The battery
case may break and the battery fluids
may cause internal damage.
• Keep the battery out of the reach of
children.
• Do not recharge, short-circuit or insert
the battery in the wrong direction.
• Dispose of the used battery according
to applicable recycling regulations.
• Do not pick up the battery using
tweezers or other metal tools, as this
will cause a short circuit.
• Wipe the battery with a clean dry
cloth to ensure proper contact.
• For California, USA only: Included lithium
battery contains Perchlorate Material
– special handling may apply. For
details see www.dtsc.ca.gov/
hazardouswaste/perchlorate.
68

Maintenance/Others

Storage
If you do not intend to use the
camcorder for a long time, store it in a
place free of dust, in low humidity, and
at temperatures not higher than 30 °C
(86 °F).
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the
camcorder body. Never use
chemically treated cloth or volatile
solvents such as paint thinner.
Lens and Viewfinder
• If the lens surface is dirty, the
autofocus may not work properly.
• Remove any dust or dirt particles
using a non-aerosol type blower
brush.
• Use a clean, soft lens-cleaning cloth
to gently wipe the lens or viewfinder.
Never use tissue paper.
LCD Screen
• Clean the LCD screen using a clean,
soft lens-cleaning cloth.
• Condensation may form on the
surface of the screen when the