KAPERSKY ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER Administrator's Manual page 71

Appendix A
OnProtected=action – actions to be performed in case of the detection of a
password-protected object. Such objects cannot be scanned.
OnError=action – actions to be performed if an error occurred during the
object scan.
Syntax of the actions that are performed with the objects listed above is
similar to that for containers described above in section [moni-
tor.actions].
Section [scanner.display] contains settings for printing the report to the screen:
ShowContainerResultOnly=no – the mode of displaying the results of the
archive scan in short format on the screen. To display short format re-
sults, assign the value yes to this setting.
ShowObjectResultOnly=no – the mode of displaying the results of the
scan of a simple object in short format on the screen. To display short
results, assign value yes to this setting.
ShowOK=yes – mode for printing messages about clean files to the screen.
In order to disable this mode assign value no to this setting.
ShowProgress=yes – mode of displaying on the screen information about
the current component operation, including the process of downloading
of the anti-virus database, or information about the scan of the current
file. To disable this mode assign value no to this setting.
Section [scanner.path] contains parameters that determine paths to files without
which the kavscanner module will not function:
BackupPath= path – full path to the backup storage directory for backup
copies of objects being scanned by the component.
Section [updater.path] includes settings that define paths to the files required for
the operation of the anti-virus database updating component:
AVBasesTestPath – full path to the anti-virus database storage directory.
BackUpPath – full path to the anti-virus database backup copy storage di-
rectory.
Section [updater.report] contains the settings for generating reports about the
results of the keepup2date component operation.
Append=yes – mode for appending new messages to the report file. In or-
der to disable this mode assign value no to this setting.
ReportFileName – name of the file into which results of the component op-
eration will be logged. If the syslog value is specified, the information is
recorded into the system log at the daemon facility.
71