Post-Install Configuration - KAPERSKY ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER Administrator's Manual

Installing Kaspersky Anti-Virus
3. Registration of required services depending upon the host system.
4. Setting up default parameters in configuration files of the product compo-
nents.

3.3. Post-install configuration

Post-install configuration is the second part of Kaspersky Anti-Virus setup. To
initiate product configuration, use the postinstall.pl script located in the
/opt/kaspersky/kav4fs/lib/bin/setup directory.
During installation to a computer running Debian the post-install confi-
guration script will be launched automatically.
After script start, you will be offered to perform the following steps:
1. Specify the path to your license key file.
2. Configure the parameters of the proxy server used for connection to the
Internet in the following format:
http://<IP of the proxy server>:<port>
or
http://<user_name>:<password>@<IP of the proxy serv-
er>
:<port>,
depending upon authorization necessity for the proxy. The updating
component of the application (keepup2date) uses the value for connec-
tion to the servers of Kaspersky Lab and downloading updates to the an-
ti-virus databases.
If you do not use a proxy for connection to the Internet, set the parame-
ter to no.
3. Download the anti-virus databases from the servers of Kaspersky Lab.
Enter yes or no depending upon your wish to perform the update imme-
diately.
4. Configure interaction with Webmin.
5. Start compilation of the kavmonitor module. During the stage your com-
puter will compile the libraries required for kavmonitor operation. If the
kernel source code is not located in the default directory, enter the follow-
ing in the command line to compile the kavmonitor component:
# /opt/kaspersky/kav4fs/src/kavmon.pl –b [PATH]
15