KAPERSKY ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER Administrator's Manual page 69

Appendix A
MailPlain=yes – scan e-mail messages in plain text format. To disable this
mode assign value no to this setting.
Packed=yes – packed files scan mode. To disable this mode assign value
no to this setting.
Recursion=yes – mode for recursive scanning of directories during the anti-
virus scan. In order to disable this mode assign value no to this setting.
SelfExtArchives=yes – self-extracting archives scan mode. In order to dis-
able this mode assign value no to this setting. If the archive scan mode
is enabled (Archives=yes), self-extracting archives will be scanned
even if the SelfExtArchives setting is assigned the value no.
Ichecker=yes – the mode for the use of the iChecker technology during the
anti-virus scan. In order to disable this mode assign value no to this set-
ting.
UseAVbasesSet=standard|extended – the set of anti-virus database used
by the application. The extended set contains, in addition to records
contained in the standard set, signatures of riskware, such as adware
and remote administration programs.
FollowSymlinks – the option controls handling of symbolic links. If the pa-
rameter is set to yes, the application will follow the links that point to di-
rectories while scanning.
MaxLoadAvg – maximum processor load.
Section [scanner.report] contains settings for generating reports about the
results of the kavscanner component operation.
Append=yes – mode for appending new messages to the report file. In or-
der to disable this mode assign value no to this setting.
ReportFileName – a name of the report file into which results of the compo-
nent operation will be logged. If the syslog value is specified, the infor-
mation is recorded into the system log at the daemon facility.
ReportLevel=4 – report detail level (see 5.6 on p. 42).
ShowOK=yes – mode for logging messages about clean files into the re-
port. In order to disable this mode assign value no to this setting.
ShowContainerResultOnly=no – the mode of displaying the results of the
archive scan in short format. In order to display short report assign val-
ue yes to this setting.
ShowObjectResultOnly=no – the mode of displaying the results of the
scan of a simple object in short format. In order to display short format
assign value yes to this setting.
69