Installing Network Agent; Configuring Network Agent - KAPERSKY ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER Administrator's Manual

Hide thumbs Also See for ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER:

Table of Contents

where [PATH] stands for the path to the kernel source code.

3.4. Installing Network Agent

If you plan to manage the application remotely using Kaspersky Administration

Kit, the Network Agent has to be installed.

To initiate Network Agent installation from its .rpm package, enter the

following in the command line:

rpm –i <distribution_package_filename>

To initiate Network Agent installation from its .deb package, enter the

following in the command line:

# dpkg –i

After installation, the Network Agent has to be configured for its proper

interaction with Kaspersky Administration Kit. To start configuration, run the

postinstall.pl script located in the /opt/kaspersky/klnagent/lib/bin/setup directory.

During Network Agent installation to a computer running Debian the

post-install configuration script will be launched automatically.

After script start, you will be offered to perform the following steps:

1. Specify the DNS name or IP address of your Administration Server.

2. Specify the port number for the Administration Server.

3. Specify the SSL port number of the Administration Server.

4. Define whether the SSL connection should be used for data transfer.

5. Specify the default administration group name.

<distribution_package_filename>

Kaspersky Anti-Virus ® 5.7 for Linux File Server

Table of Contents

Do you have a question about the ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER and is the answer not in the manual?