KAPERSKY ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD WORKSTATION AND FILE SERVER Administrator's Manual page 56

56
Kaspersky Anti-Virus ® 5.5 for Linux and FreeBSD Workstation and File Server
LocalFS=no – mode for scanning only the local file system. In order to enable
this mode assign value yes to this setting.
MailBases=yes – mail database scan mode. In order to disable this mode as-
sign value no to this setting.
MailPlain=yes – scan of mail messages in format plain.text . In order to disable
this mode assign value no to this setting.
Packed=yes – packed files scan mode. In order to disable this mode assign
value no to this setting.
Recursion=yes – mode for recursive scanning of folders during the anti-virus
scan. In order to disable this mode assign value no to this setting.
SelfExtArchives=yes – self-extracting archives scan mode. In order to disable
this mode assign value no to this setting. If the archive scan mode is enabled
(Archives=yes), then self-extracting archives will be scanned even if the
SelfExtArchives setting has value no assigned to it.
Ichecker=yes – the mode for the use of the iChecker technology during the anti-
virus scan. In order to disable this mode assign value no to this setting.
UseAVbasesSet=standart|extended – the set of anti-virus database used by
the application. The extended set contains, in addition to records contained in
the standard set, signatures of riskware, such as: adware, remote administration
programs, etc.
FollowSymlinks – the option controls handling of symbolic links. If the parame-
ter is set to yes, the application will follow the links that point to directories while
scanning.
MaxLoadAvg – maximum processor load.
Section [scanner.report] contains the settings of generating reports about the
results of the kavscanner component operation.
Append=yes – mode for appending new messages to the report file. In order to
disable this mode assign value no to this setting.
ReportFileName – filename of the file into which results of the component op-
eration will be logged.
ReportLevel=4 – report detail level.
ShowOK=yes – mode for logging messages about clean files into the report. In
order to disable this mode assign value no to this setting.
ShowContainerResultOnly=no – the mode of displaying the results of the ar-
chive scan in short format. In order to display short report assign value yes to
this setting.
ShowObjectResultOnly=no – the mode of displaying the results of the scan of
a simple object in short format. In order to display short format assign value yes
to this setting.