Object Backup Copying Mode - KAPERSKY ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD WORKSTATION AND FILE SERVER Administrator's Manual

46
achieved using standard Unix tools (command chmod). Therefore, the task
implementation procedure shall be modified as follows:
Enter the
[scanner.container] of the applications' configuration file to specify the
rules for processing infected objects:
OnInfected=exec mv %FULLPATH%/%FILENAME%
/tmp/infected/%FILENAME%; chmod –x
/tmp/infected/%FILENAME%
Task: scan for viruses all files attempted to be accessed, disinfect in-
fected objects. If the disinfection is not successful, move the infected
objects with full paths to them into folder /tmp/infected.
Solution: in order to perform this task, do the following:
1. Turn on the disinfection mode for infected objects (Cure = yes in
section [monitor.options] in the configuration file).
2. Specify the rules for isolation of infected objects. In order to do it,
configure the setting in section [monitor.actions] of the configuration
file as follows:
OnInfected=MovePath /tmp/infected

6.3. Object backup copying mode

If the files scanned were infected and deletion from the file system is indicated as
the action to be performed with infected objects, there is a risk of losing some
important data. In order to avoid it, Kaspersky Anti-Virus includes the ability to
copy files to the backup storage.
Before the attempt to disinfect or delete an object its copy will be automatically
created in the backup storage (section [monitor.path], settings BackupPath).
This allows to create a backup copy (and, if required, to restore the original file) if
the object is corrupted during the disinfection. The object with the full path will be
saved into the backup storage. If an object is saved twice into the backup
storage, the older copy of the object will be automatically replaced with the newer
one.
Please note: by default the mode of saving into the backup storage is turned off
and, therefore, the path to the folder in which the backup copies are supposed to
be stored, is not defined.
In order to turn on this mode, manually specify the path to the folder in which
backup copies of the objects will be stored.
Kaspersky Anti-Virus ® 5.5 for Linux and FreeBSD Workstation and File Server
following line in sections [scanner.object] and