Advanced settings
"file_name" result [virus_name]
Short message format (ShowObjectResultOnly=yes):
"file_name" result
where:
virus_name is the name of the virus for the events CURED,
INFECTED, CUREFAILED, WARNING and SUSPICION. For other
events this field is left blank.
result – The status assigned to the file after scanning and
disinfection. A full list of possible results is provided in the table
below.
With compound objects (archives) the messages can also have an extended or
brief format.
Extended message format (ShowContainerResultOnly=no):
"archive_name"
"file_name" result [virus_name]
"file_name" result [virus_name]
Short message format (ShowContainerResultOnly=yes):
"file_name" result
Event/Result
OK
CURED
(only
disinfection
enabled)
INFECTED
CUREFAILED
with disinfection mode
enabled)
WARNING
Value
The file is not infected.
with
The file had been infected and was successfully
mode
cleaned.
The file is infected by one or more viruses. No
request for disinfection.
(only
The file is infected by one or more viruses. Request
for disinfection is present, but disinfection of the file
is impossible.
The code of the file is similar to that of a known
virus.
96
Need help?
Do you have a question about the ANTI-VIRUS 5.0 - FOR LINUX FREEBSD-OPENBSD MAIL SERVER and is the answer not in the manual?