Aveserver Reloading - KAPERSKY ANTI-VIRUS 5.0 - FOR LINUX FREEBSD-OPENBSD MAIL SERVER Administrator's Manual

Advanced settings
Detach from terminal – The process is disconnected from the terminal
immediately after startup. This mode should be enabled, since system
boot will not proceed until the process disconnects. The mode is
enabled by default (value is yes). The mode should only be disabled
(value no) when the process is controlled by a program such as SVC.
Startup mode – Switching of the process from the dialog mode to the
background mode on condition that DetachFromTerminal=yes. The
fast
value
immediately after loading the configuration file, returning the code 0.
The value normal switches the process to the background mode only
after loading the anti-virus database and the license keys to memory.
Local socket permission – The octonary permission with which the socket
is created. By default Local socket permission=0666.
!
Other KAV for Mail Servers
Figure 25. Parameter of the work with the aveserver component.

6.3.1. Aveserver reloading

The aveserver process is automatically reloaded immediately after the anti-virus
database is updated on condition that the appropriate setting is enabled in the
configuration (ReloadApplication=yes).
The process is reloaded by the command kill –HUP <process PID>. After its
execution the process receives the SIGHUP signal. Having received this signal,
the parent process reloads the configuration file, the license keys, and the
sets that the daemon switches to the background mode
The visual speed of launching the process in the fast mode is
higher, but the probability exists that the daemon will fail to
load because of some fatal error and nothing will be output to
the console!
!
AVServer
Kaspersky Anti-Virus
®
engine server tab
92