Setting Antiviral Protection Of The Server's File Systems; Scan Area - KAPERSKY ANTI-VIRUS 5.0 - FOR LINUX FREEBSD-OPENBSD MAIL SERVER Administrator's Manual

Advanced settings
The notification of which you have changed the parameters will be marked by the
symbol (+) next to its name in the list.
6.2. Setting antiviral protection of
the server's file systems
All the parameters of the antiviral protection of the server's file systems can be
divided into groups that set:
Scan area (see section 6.2.1 on page 88).
File check and disinfection mode (see section 6.2.2 on page 89).
Actions to be taken to the files (see section 6.2.3 on page 90).
Parameters of generating the work results report (see section 6.4 on page
93).
Below is a detailed explanation of each of these groups.

6.2.1. Scan area

Scan area can be conditionally divided in two parts:
Scan path – list of directories and files scanned for viruses.
Scan objects – a set of file types scanned for the presence of viruses
(archives, mail messages etc.)
By default, all the objects of any available file system are scanned, beginning
from the current directory.
In order to check all the file systems of the server go to the root
directory or in the command line specify scan area /.
You can redefine the scan path using one of the following methods:
When launching the component, list directories and files with absolute or
relative (to the current directory) paths to them directly in the command
line separating them by spaces.
Set scan paths in a text file and specify its name in the command line
using the key
separate line with the absolute path to it.
-@ <file_name>.
Each object in such a file is listed on a
88