KAPERSKY ANTI-VIRUS 5.0 - FOR LINUX FREEBSD-OPENBSD MAIL SERVER Administrator's Manual page 103

Questions and answers
about your problem. They only can help after fully understanding
and reproducing it.
5. Send the following data to the Technical support service (pack
them in one archive before sending):
/var/log/aveserver.rpt
6. Make sure to specify in your mail if one of the following is present
in your system:
Specify the approximate amount of daily traffic and whether or not
7.
the server has peak loads.
Question: How can I save the program's console output to a file?
In order to save the information output to the console by Kaspersky
Anti-Virus
in the configuration file (see section A.2 on page 106) or type the
following in the command line:
where:
some_app – The application, the lines of standard output and error
messages which you wish to save to a file.
text_file – Full path to the file where the information will be saved.
For example:
All the configuration files of your mail agent (MTA)
Files from the directory /etc/kav/
Mail system report file
The anti-virus
The information output to the console by the command
The key file
SCSI controller
A very old or new processor, or more than one processor
Less than 64 Mb or more than 2 Gb of RAM.
®
during its work you can either make the appropriate settings
$ some_app > ./text_file 2>&1
$kavupdater > ./updater.log 2>&1
In this case, all the standard output messages and error
messages of the kavupdater component will be output to the
file updater.log in the current directory.
component report file, for example
ps -ax
102