DURKOPP ADLER 911 Operating & Installation Instructions Manual page 44

MP6 - Counter
Counter type
The following possibilities available:
Increment counter (def.)
After each sewn program the counter will step up.
Decrement counter
After each sewn program the counter will step down.
Increment sequence counter
After each sewn sequence the counter will step up.
Decrement sequence counter
After each sewn sequence the counter will step down.
Reset value for the counter
(min. = 0 .. max. 9999; def. 0)
Reset value for the counter
Set seam count for bobbin reserve
(min. = 0 .. max. 100; def. 0)
After the sewing of the set seams the user will receive a message.
Not active when set to the value 0.
Set capacity for bobbin reserve
(min. = 0.0 .. max. 400.0; def. 0.0m)
After the consumption of the capacity a message is generated
for the user.
Not active when set to the value 0.
40