DURKOPP ADLER DAC BASIC - CLASS 271 MANUAL PART II V 12-2010 Operating Manual page 9

L C P Min
Seam ways
t 07 00 0
t 07 01 0
Motor
t 08 00 500
t 08 01 100
t 08 02 100
t 08 03 1
t 08 04 1
t 08 05 0
t 08 06 0
t 08 07 0,1
t 08 08 0
t 08 09 0
t 08 10 -
t 08 11 -
t 08 12 0
t 08 13 0
t 08 14 0
t 08 15 0
t 08 20 -
t 08 21 12
t 08 22 0
t 08 23 10
t 08 24 5
t 08 30 0
t 08 31 0
t 08 32 -
t 08 40 500
© 2010 Dürkopp Adler AG
Max Preset Unity
2 0 -
1 0 -
9999 4800 rpm
400 180 rpm
1000 180 rpm
100 30 rpm/ms
100 35 rpm/ms
1 0 -
2 0 -
6,0 2,0 A
255 20 -
999 200 ms
- - -
- - -
359 40 °
359 306 °
359 350 °
359 296 °
- - -
64 24 Steps
4 1 -
255 90 ms
255 15 ms
1 0 -
1 0 -
- - -
9999 1800 rpm
Description
Treatment position-2 in seam ways.
0 = Demolition of the seam. The next seam way is sewn; The
seam is broken off with thread trimmer at the last seam of
the program.
1 = Demolition of the seam with thread performances (even if
inactive). The next seam process is a free seam.
2 = Demolition of the seam with thread performances (even if
inactive). Seam program is stopped.
Automatic system business.
0 = off;
1 = on
Maximum speed
Minimal speed
Positioning speed
Acceleration ramp
Braking ramp
Direction of rotation of the motor
0 = on the left;
1 = on the right
Motor brake at the normal stop
0 = Brakes for the duration of t0805;
1 = Brake durably actively at the stop
2 = Position will be hold permanently
Holding current at the machine stop
Reaction rate at changes of the needle position
Period of the motor brake
Setting the reference position
Setting the needle positions
Lower needle position (Position 1)
Thread lever up position (Posit ion 2)
Direction finder position
on threading position
Calibrating pedal
Number of speed steps of the pedal
Speed curve
Debouncing of the position-1
Debouncing of the position-2
Shows the machine speed
0 = No;
1 = Yes
Shows the current needle position
0 = No;
1 = Yes
The Needle will move to the upper needle position if the
energy is on and the pedal was used.
0 = No;
1 = Yes
Speed limitation DB3000
II-9
Operating manual part II