DURKOPP ADLER DAC BASIC - CLASS 271 MANUAL PART II V 12-2010 Operating Manual page 13

L C P Min
t 51 12 -
t 51 13 -
t 51 14 0
© 2010 Dürkopp Adler AG
Max Preset Unity
- - -
- - -
1 - -
Description
Hardware-Test
Bold Inputs or Outputs are only available at DACclassic
controls.
1.Analog
Um: Supply Voltage in V
U24: Supply Voltage for Outputs in V
Imo: Current of the 24V supply
PAn: Analog value of the pedal
Nre: X1.4 Analog Input
Ian: X1.1 Analog Input
2.Inputs
X1.5: Manual Backtack
X1.6: Nedle up/down
X1.7: No Function
X1.8: No Function
X1.9: No Function
X1.10: No Function
X1.11: Machine run blockage
X1.12: No Function
X1.13: Light barrier
X1.14: Backtack suppression/recall
X2.1: No Function
X2.2: No Function
X2.3: No Function
X2.4: No Function
X2.6: No Function
X2.7: No Function
3.Outputs
X1.15: No Function
X1.17: No Function
X1.18: No Function
X1.20: No Function
X1.21: No Function
X1.22: No Function
X1.23: No Function
X1.24: LED Backtack suppression/recall
X1.25: No Function
X1.26: No Function
X1.27: Thread clamp
X1.28: No Function
X1.29: No Function
X1.30: No Function
X1.31: No Function
X1.32: No Function
X1.34: Backtacking
X1.35: Sewing foot lifting
X1.36: Thread tension
X1.37: Thread trimmer
Disturbance reports show the last on 10
Reset of the service counter
0 = No;
1 = Yes
II-13
Operating manual part II