DURKOPP ADLER DAC BASIC - CLASS 271 MANUAL PART II V 12-2010 Operating Manual page 12

Operating manual part II
L C P Min
Turning Back
t 12 00 0
t 12 01 10
t 12 02 10
Needle cooling
t 13 00 0
t 13 01 0,0
t 13 02 100
Roller
t 14 00 0
t 14 01 0
t 14 02 0
t 14 03 0
Miscellaneous of the control
t 51 00 -
t 51 01 -
t 51 02 -
t 51 03 -
t 51 04 -
t 51 10 0
t 51 11 0
Max Preset Unity
1 0 -
180 10 °
255 20 ms
1 0 -
9,999 2,500 s
9999 !!!! rpm
3 0 -
1 0 -
1 0 -
255 0 Stitches
- - -
- - -
- - -
- - -
- - -
4 - -
3 - -
Description
Turning back
0 = No;
1 = Yes
Moving angle of rotation
Waiting time up to the turning back
Mode of the needle cooling
0 = Normal needle cooling;
1 = Needle cooling depending on speed
Switch-off delay of needle cooling
Speed for activate the needle cooling
Mode for lifting the roller
0 = No lifting;
1 = Lifting with sewing foot;
2 = Lifting with bartack;
3 = Lifting with bartack and sewing foot
Lifting roller when enabling high lift for walking foot.
0 = No;
1 = Yes
Stitch counting after sewing foot lifting till roller remains
lowered.
0 = No;
1 = Yes
Number of stitches till lower the roller
Showing software version
Showing control serial number
Showing machine serial number
Showing production date
Showing machine class and –sub class
Load of parameters
0 = Nothing;
1 = Sewing data of the there dongle;
2 = Sewing data of the backup area;
3 = Seam ways of the there Dongle
4 = Master reset
Store of parameters
0 = Nothing;
1 = Sewing data on the there dongle;
2 = Sewing data to the backup area;
3 = Seam ways on the there Dongle
II-12 © 2010 Dürkopp Adler AG