DURKOPP ADLER DAC BASIC - CLASS 271 MANUAL PART II V 12-2010 Operating Manual page 8

Operating manual part II
L C P Min
t 02 01 0
t 02 10 0
t 02 11 0
t 02 20 0
t 02 21 0
Sewing foot lifting
t 03 00 0
t 03 10 0
t 03 11 0
t 03 12 0
t 03 50 0
t 03 51 5
t 03 52 0,0
t 03 53 5
t 03 54 0
Soft start
t 05 00 120
t 05 01 1
Max Preset Unity
1 0 -
359 50 °
359 306 °
255 0 ms
255 40 ms
1 1 -
255 80 ms
255 40 ms
255 80 ms
999 200 ms
100 100 %
600,0 300,0 s
100 43 %
1 1 -
1000 800 rpm
99 2 Stitches
Description
Pedal position for starting the cutting process.
0 = Position -2;
1 = Position -1
on switching angle t 08 12 <= t 02 10 < t 02 11
off switching angle t 02 10 < t 02 11 <= t 08 13
Delay time for a repeated activation of the Cutting magnet.
Delay time for turning the cutting magnet off
sewing foot lifting active
0 = No;
1 = Yes
Intermediate lag of the machine after switching the sewing
foot lifting off
Turn-on delay of the sewing foot lifting at speed 0
Turn-on delay of the sewing foot lifting at the seam end
Drive time of the sewing foot lifting magnet in the time
period t
1
Pulse duty ratio in the time period t
Drive time of the foot lifting magnet in the time period t
(If you adjust 0s the thread clamp magnet will be driven
permanently)
Pulse duty ratio in the time period t
Increasing U when the foot lifting magnet will be driven
mag
0 = No;
1 = Yes
Soft start speed
Number of soft start stitches
II-8
1
2
2
© 2010 Dürkopp Adler AG