DURKOPP ADLER DAC BASIC - CLASS 271 MANUAL PART II V 12-2010 Operating Manual page 6

Operating manual part II
L C P Min
t 00 35 0
t 00 36 0
t 00 40 0
t 00 41 0
t 00 45 0
t 00 46 0
t 00 50 0
t 00 51 5
t 00 52 0,0
t 00 53 5
t 00 54 0
Thread Clamp
Max Preset Unity
1 1 -
2000 500 rpm
2 1 -
2 1 -
1 0 -
1 0 -
999 100 ms
100 100 %
600,0 60,0 s
90 45 %
1 1 -
Description
Reducing speed when shifting the feed dog
0 = off;
1 = on
Wished speed reduction when shifting the feed dog.
Type of the start backtack, if the backtacking is toggled.
0 = Simple start backtack;
1 = Double start backtack;
2 = Start multiple backtack
Type of the end backtack, if the backtacking is toggled.
0 = Simple end backtack;
1 = Double end backtack;
2 = End multiple backtack
Switching on the manual backtack
0 = Needle below;
1 = Needle above
Turning the manual backtack off
0 = Needle below;
1 = Needle above
Drive time of the backtack magnet in the time period t
Pulse duty ratio in the time period t
Drive time of the backtack magnet in the time period t
(If you adjust 0s the backtack magnet will be driven
permanently)
Pulse duty ratio in the time period t
Increasing U when the backtack magnet will be driven
mag
0 = No;
1 = Yes
II-6
1
1
2
2
© 2010 Dürkopp Adler AG