3.3.2
Sewing units without rollers
2
1
The working height can be set between 760 mm and 910 mm
(measured up to the upper edge of the table top).
Caution: Risk of injury!
Do not lift the sewing unit using the table top.
Put a lifting cart or a forklift underneath the sewing unit before
loosening the clamping screw.
Set the height of the sewing unit by equally screwing out the feet of
the stand.
–
Loosen the nuts 2 (4x).
–
Turn the threaded rods 1 accordingly.
–
Fasten the nuts 2.
2
7