Pile Height Selection; Suggested Pile Height Settings - Kenmore 3911 - Upright Vacuum Use And Care Manual

PILE HEIGHT SELECTION AND SETTING
To select a pile height setting:
Select a pile height setting by pressing the
HEIGHT ADJUST pedal on the side of the
nozzle° The pile height setting shows on
the indicator windowr See SUGGESTED
PILE HEIGHT SETTINGS.
Attention: Refer to your carpet
manufacturers cleaning
recommendations_ Some more delicate
carpets may require that they be
vacuumed with the agitator turned off to
prevent carpet damage,
ADJUST
Pedal
Indicator
Window
SUGGESTED PILE HEIGHT SETTINGS
There are four (4) pile height settings on
the vacuum cleaner,, For best deep down
cleaning, use the XLO setting_ However,
you may need to raise the height to make
some jobs easier, such as scatter rugs
and some deep pile carpets, and to
prevent the vacuum cleaner from shutting
off°
Suggested settings are:
HI - Shag, deep pile, or scatter rugs,
MED - Medium to deep pile,
LO - Low to medium pileo
XLO - Most carpets, bare floors, and
delicate carpets that require agitator to be
turned off,
[
When the vacuum cleaner is running with
normal air flow, the light on the CHECK
BAG indicator is off. The light comes on
whenever the airflow becomes blocked, If
that occurs, check the disposable dust bag,
motor safety filter and other possible clog
locations shown in CLOG REMOVAL
CHECK BAG INDICATOR ]
NOTE: It is normal for the CHECK BAG
indicator to come on when using certain
attachments, due to reduced airflow through
attachment, No maintenance is required°
CHECK BAG
11