IBM 88784RU User Manual page 94

2. Make sure that all nodes in the multi-node configuration contain
3. Connect the SMP Expansion cables. See "SMP Expansion cabling" on page 49
4. Connect all nodes to an ac power source and make sure that they are not
5. Access the network used by the multi-node configuration and connect and log in
82
IBM System x3950 Type 8872 and System x3950 E Type 8874: User's Guide
microprocessors that are the same cache size and type, and the same clock
speed.
for instructions.
running an operating system.
to the Remote Supervisor Adapter II Web Interface on the primary node. See
the Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II
User's Guide for more information; then, continue with the procedure to create a
scalable partition.
Note: The Remote Supervisor Adapter II Web Interface must be open to view,
create, delete, or manage scalable partitions. Make sure that the Web Interface
is open before you continue.