Dell PowerEdge 2410 Installation Manual page 28

Installing the Side Stabilizer Feet
1 Remove the lower side panels (see "Removing the Lower Side Panels" on
page 13).
2 On the side of the rack frame's bottom rail, locate the four holes
(see Figure 1-14).
3 Position each stabilizer foot against the base of the rack frame and align its
holes with the corresponding holes in the frame.
Figure 1-14. Installing the Side Stabilizer Feet
1 side stabilizer foot (2 per side)
4 Use the provided bolts, washers, and cage nuts to secure each foot to the
rack as shown in Figure 1-14.
26
Installation Guide
1