Chapter 6. Symptom-to-FRU index
This index supports xSeries 346 servers.
Notes:
1. Check the configuration before you replace a component. Configuration
2. For IBM devices not supported by this index, refer to the manual for that device.
3. Always start with "General checkout" on page 61.
The symptom-to-FRU index lists symptoms, errors, and the possible causes. The
most likely cause is listed first. Use this symptom-to-FRU index to help you decide
which FRUs to have available when servicing the server.
The first column of the two-column tables in this index lists error codes or
messages, and the last column lists one or more suggested actions or FRUs to
replace. Take the action (or replace the FRU) that is suggested first in the list, and
then try the server again to see whether the problem has been corrected.
© Copyright IBM Corp. 2005, 2007
. . . . . . . . . . . . . . . . . . . . . . . . 91
. . . . . . . . . . . . . . . . . . . . . . . 100
. . . . . . . . . . . . . . . . . . . . . 102
problems can cause false errors and symptoms.
. . . . . . . . . . . . . . . . . . . . 94
. . . . . . . . . . . . . . . . . . . 97
73