Create Diskettes; Create Blank Formatted Diskette; Utility Partition - Dell PowerEdge 2300 User Manual

2-8 Dell PowerEdge 2300 Systems User's Guide
Choose a language:
Deutsch, English,
Español, Français
Configure the system:
Run Resource Configu-
ration Utility
Configure RAID
subsystem
Run system utilities:
Run system
diagnostics
Upgrade utility
partition

Create diskettes:

Create blank diskette
Create utility diskettes:
Create Resource
Configuration Utility
library diskette
Create RAID configura-
tion diskette
Create Diagnostics
diskette
Create System utility
diskette
NOTE: The options displayed on your system are dependent on your system configu-
ration and may not include all of those listed here.
Allows the user to select the language in which to
display menus and messages.
Runs the Resource Configuration Utility.
Runs the Dell PowerEdge Expandable RAID Control-
ler configuration utility if the controller card is
present on your system.
Runs the system hardware diagnostics.
Allows the user to update the utility partition (for
example, adding, removing, or changing features
installed on the partition).
Creates a blank, formatted diskette.
Creates a diskette containing the configuration
(.cfg) files for commonly used ISA expansion cards.
This diskette is used with the bootable Resource
Configuration Utility diskette.
Creates a bootable diskette for running the Dell
PowerEdge Expandable RAID Controller configura-
tion utility (if the controller card is present on your
system). The RAID Configuration Utility provides an
alternative method for configuring the card.
Creates a bootable diskette from which the hard-
ware diagnostics can be run.
Creates a bootable diskette from which utilities,
such as the Asset Tag utility, can be run.