Dell PowerEdge 2300 User Manual page 85

A list of expansion slots and the cards in them appears on the screen.
Remember to save a printout or written copy of the new information.
Use the following procedure before an ISA expansion card is removed but after a PCI
expansion card is removed. See "When to Run the Resource Configuration Utility"
found earlier in this chapter for more detailed information.
A list of expansion slots and the cards installed in them appears on the screen.
Remember to save a printout or written copy of the new information.
If there are no resource conflicts, the configuration information is saved to a system
configuration (.sci) file when you exit the utility. If there is a resource conflict, you
must resolve it before completing the configuration. For more information, see
"Resolving Resource Conflicts" found later in this chapter.
The RCU lets you set a variety of system options through the .sci file. Through this
file, you can notify the system of changes to your hardware and memory configura-
tion, manage input/output (I/O) ports, and set other system operating parameters.
Some of the categories do not offer options, but reflect installed hardware detected
by the system. These items are displayed for your information only; you cannot
change them through the utility.
Using the Resource Configuration Utility 5-7