Dell PowerEdge 2300 User Manual page 88

5-10 Dell PowerEdge 2300 Systems User's Guide
System - Dell System PowerEdge 2300
RS-232 COM Port 1
RS-232 COM Port 2
Parallel Port
Floppy Controller
Mouse Controller
PCI 3 - Adaptec Ultra/Ultra Wide SCSI Ctrlr
PCI Function 1
Embedded - PCI Host Bridge
PCI Function 1
Embedded - PCI-PCI Bridge - Bus 1
PCI Function 1
Bus 1,0 - PCI VGA Controller
PCI Function 1
Standard VGA Resources
Embedded - DEC PCI-PCI Bridge (21152)
PCI Function 1
Bus 2,4 - Adaptec AIC-7890 SCSI Ctrlr
PCI Function 1
Bus 2,6 - Adaptec AIC-7860 SCSI Ctrlr
PCI Function 1
The Step 4: Examine Switches or Print Report option lists the required switch and
jumper settings for each expansion card in your computer. To view the settings, high-
light the card and press <Enter>. For ISA expansion cards, it is important to compare
the jumper and switch settings listed on the screen to the actual settings on the card.
Press <F7> to make a copy of or print the settings. If your computer is attached to a
printer, you can print out the information or copy it to a file.
The Step 5: Save and Exit option allows you to save or cancel the configuration
changes you have made. When you select this option, follow the directions on the
menu that displays.
If you save your changes , the utility saves the new configuration in your system's
NVRAM and in a file on your RCU diskette. Then, the utility automatically reboots your
system.
IRQ 4 PORT 3F8h-3FFh
IRQ 3 PORT 2F8h-2FFh
IRQ 7 PORT 378h-37Fh
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled