5-4
Dell PowerEdge 2300 Systems User's Guide
Follow these steps the first time you use the RCU. Later, if a card is added, removed,
or repositioned, you must follow the procedure described in "Step 2: Add or Remove
Boards" found later in this chapter.
To run the program from your hard-disk drive , switch to the c:\rcu subdirec-
tory, type sd at the operating system prompt, and press <Enter>.
The Main Menu appears as follows:
Main Menu
Learn about configuring your computer
Configure computer
Set date
Set time
Maintain system configuration diskette
Exit from this utility
The first option in the menu is already highlighted.
After reading the online overview, you are ready to use the program to configure
your computer for any PCI expansion cards currently installed or any ISA expan-
sion cards that will be installed in your computer's expansion slots.
The following five sections describe each of the menu options in the Main Menu and
the submenus for those options.
The Learn About Configuring Your Computer option presents an overview of the con-
figuration process. As you finish reading a screen, press <Enter> to view the next
screen. Press <F10> to return to the Main Menu.