Setting Console Security - IBM 86495BX Installer And User Manual

30
LCM Installer and User Guide
b. Left-click on the title bar and drag to the desired location.
c. Right-click to return to the Flag dialog box.
Figure 3.9: Set Position Flag
NOTE: Changes made to the fl ag position are not saved until you click OK in the Flag dialog box.
6. Click OK to save settings.
-or-
Click X to exit without saving changes.

Setting console security

OSCAR enables you to set security on your analog port console. You can
establish a screen saver mode that engages after your console remains unused
for a specified delay time. Once engaged, your console will remain locked until
you press any key or move the mouse. You will then need to type in your
password to continue.
Use the Security dialog box to lock your console with password protection, set
or change your password and enable the screen saver.
NOTE: If a password has been previously set, you will have to enter the password before being
able to access the Security dialog box.
To access the Security dialog box:
1. Press Print Screen. The Main dialog box will appear.
2. Click Setup - Security. The Security dialog box appears.
Figure 3.10: Security Dialog Box