Assigning Device Types - IBM 86495BX Installer And User Manual

26
LCM Installer and User Guide
To assign names to servers:
1. In the Names dialog box, select a name or port number and click Modify.
The Name Modify dialog box appears.
Figure 3.4: Name Modify Dialog Box
2. Type a name in the New Name box. Names of servers may be up to 15
characters long. Legal characters include: A-Z, a-z, Ø-9, space and hyphen,
in any combination.
3. Click OK to transfer the new name to the Names dialog box. Your selection
is not saved until you click OK in the Names dialog box.
4. Repeat steps 1-3 for each server in the system.
5. Click OK in the Names dialog box to save your changes.
-or-
Click X or press Escape to exit the dialog box without saving changes.

Assigning device types

While the LCM automatically discovers cascade switches attached to your
unit, you will need to specify the number of ports on the cascade switch
through the Devices dialog box. You will see an Sw-8 designation appear in the
Type category. When you select that switch from the list, the Modify button
appears, allowing you to assign the appropriate number of ports to it.
To access the Devices dialog box:
1. Press Print Screen. The Main dialog box will appear.
2. Click Setup - Devices. The Devices dialog box appears.
NOTE: The Modify button will only be available if a confi gurable switch is selected.