IBM 86495BX Installer And User Manual page 22

14
LCM Installer and User Guide
To adjust the mouse acceleration:
Before a server can be connected to the LCM, an adjustment to mouse
acceleration must be made. Use the default Microsoft
driver for all attached Microsoft Windows systems attached to the LCM.
For Windows NT ® (using default drivers):
1. From the desktop, select Start - Settings - Control Panel - Mouse.
2. Click on the Motion tab.
3. Set the pointer speed to Slow. Do this for any Windows NT user account
that will be accessing the Windows NT system through the LCM.
For Microsoft Windows 2000/Windows XP:
1. From the desktop, select Start - Settings - Control Panel - Mouse.
2. Click on the Motion tab.
3. Set the Acceleration setting to None and the speed setting to the default of 50%.
To connect a CCO cable to an IBM C2T server:
1. Locate the CCO cables and CAT 5 cabling for your LCM.
2. Connect the CCO cable to the LCM by attaching one end of the CAT 5
cabling to the RJ45 connector on the CCO cable.
3. Connect the other end of the CAT 5 cable to an ARI port on the back of
your LCM.
4. Attach the C2T connector from the CCO cable into the appropriate port on
the back of your C2T server.
To chain servers together using KCO cables:
1. Locate the KCO cables and CAT 5 cabling for your LCM.
2. Attach one end of the CAT 5 cabling that will run from your KCO cable to
the LCM to the RJ45 connector on the KCO cable.
3. Connect the other end of the CAT 5 cable to an ARI port on the LCM.
4. Attach the appropriately color-coded cable ends to the keyboard, monitor and
mouse ports on the fi rst server you will be connecting to this LCM.
5. Attach one end of the CAT 5 cabling that will connect the fi rst two servers
to the second RJ45 connector on the KCO cable for Server 1.
6. Attach the other end of this cable to the fi rst RJ45 connector on the KCO
cable for Server 2.
7. Repeat steps 4-6 for all servers you chain together.
8. When you reach the end of the chain, attach a terminator to the second
RJ45 connector on the last KCO cable in the chain.
® Windows ® PS/2 mouse