Figure 3.5: Devices Dialog Box
When the LCM discovers a cascade switch, you will notice the port numbering
change to accommodate each server under that switch. For example, if the
switch is connected to port 2, the switch port would be listed as 02 and each
server under it would be numbered sequentially 02-01, 02-02 and so on.
To assign a device type:
1.
In the Devices dialog box, select the desired port number.
2.
Click Modify. The Device Modify dialog box appears.
Figure 3.6: Device Modify Dialog Box
3.
Choose the number of ports supported by your switch and click OK.
4.
Repeat steps 1–3 for each port to which you want to assign a device type.
5.
Click OK in the Devices dialog box to save settings.
Chapter 3: Basic Operations
27