Rear-Adapter Retainer - IBM 84885BU Maintenance And Troubleshooting Manual

Rear-adapter retainer

Before you begin:
v Read Appendix B, "Safety information," on page 143.
v Review the information in "System reliability guidelines" on page 25.
To remove the rear-adapter retainer, complete the following steps:
1. Turn off the server, if it is on.
2. Disconnect the power cord from the power source and from the server; then,
3. Remove the side cover (see "Removing the side cover" on page 28).
4. Rotate the rear adapter retainer to the open position.
5. Grasp the rear adapter retainer, and gently slide the top and bottom tabs out of
To replace the rear adapter retainer, reverse the steps.
disconnect all external cables.
the notches.
Chapter 5. Field replaceable units
77