Installing The Operator Information Panel Assembly - Lenovo 653417U Installation And User Manual

2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables.
3. Remove the server from the rack and remove the cover (see "Removing and installing the cover" on
page 29).
4. Disconnect both cables from the operator information panel assembly.
5. Remove the screws that secure the operator information panel assembly to the DVD bay housing.
6. Lift the operator information panel assembly out of the server.
7. If you are instructed to return the operator information panel assembly, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.

Installing the operator information panel assembly

To install the replacement operator information panel assembly, complete the following steps:
1. Guide the operator information panel assembly into position on top of the DVD bay housing. Make
sure that the LEDs and the USB connectors are aligned with the openings in the bezel and that the
holes in the board align with the screw holes in the top of the bay housing.
2. Use the screws that you removed earlier to secure the operator information panel assembly onto the
top of the DVD bay housing.
54
ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Installation and User Guide