Hpacucli; Description; Synopsis; Examples - HP Integrity rx1600 Deployment Manual

Table 6-13 getuuid Options
Options
<disk>
-p
-t

hpacucli

Description

The hpacucli command is a disk configuration tool that can be used to configure and manage
Smart Array Controllers and RAID Array Controllers.

Synopsis

hpacucli <target> <command> [parameter=value]
Where <target> is of the format:
[controller all|slot=#|wwn=#|chassisname="AAA"|
serialnumber=#|chassisserialnumber=#|ctrlpath=#:# ]
[array all|<id>]
[physicaldrive all|allunassigned|[#:]#:#|[#:]#:#-[#:]#:#]
[logicaldrive all|#]
[licensekey all|<key>]

Examples

Example targets:
controller slot=5
controller chassisname="Lab C"
controller serialnumber=P21DA2322S
controller chassisserialnumber=9J3CJN71XDCH
controller wwn=500308B300701011
controller slot=7 array A
controller slot=5 logicaldrive 5
controller slot=5 physicaldrive 1:5
controller slot=5 physicaldrive 1E:2:3
controller slot=5 licensekey XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

Commands

Table 6-14 hpacucli Commands
Commands
add
create
delete
modify
show
Examples
controller slot=5 array A add drives=1:1-1:5
ctrl slot=1 create type=ld drives=1:1,1:2,1:3,1:5 raid=6
controller slot=5 delete
70 Utilities Reference
Description
Disk to from which information will be retrieved.
Partition number.
Shows GUID of partition type (efi, hpsp, etc).
Description
Adds a physical drive or spare to the specified array or logical drive.
Creates a logical drive
The delete command deletes part of an existing configuration.
The modify command changes the existing configuration
The show command outputs information about a device or a list of devices