HP Integrity rx1600 Deployment Manual page 31

rhel-setup.sh
sles-setup.sh
• The utilities directory contains the following files:
cfggen
efivar
getuuid
hplpcfg
hpqlarep
hpshowdisk
allboards.xml
conrep
conrep.xml
cpqacuxe
efibootmgr
hpacucli
hpia64info
hwdisc
hwquery
ifhw
This script edits the configuration in the RHEL
unattended configuration file and copies the RHEL
boot image files to the ESP partition.
This script edits the configuration in the SLES
unattended configuration file, and copies the SLES
boot image files to the ESP partition.
The RAID configuration utility for LSI controllers;
it is a counterpart of cpqacuxe. In SSTK it is used
for applying RAID 1 in LSI 1068 controllers.
A generic tool used to set EFI variables from the
SSTK LinuxPE.
This utility retrieves the Universally Unique ID
(UUID) used to identify a storage device or a single
partition.
The HP Emulex HBA configuration utility.
The HP QLogic HBA configuration utility.
This utility gathers storage device information such
as disk size, device node, controller type and target
LUN including HBA WWID, and the target port
WWN for disks in a SAN environment.
Used by the hwquery and ifhw utilities to convert PCI device IDs
found in hardware discovery into device names.
The configuration replication utility, which reads EFI variables from
the model server and records them in the conrep.dat file.
A utility that includes a list of EFI variables, which determine what
data to retrieve from the server. You can edit this file to control the
data collection.
The array configuration utility, which operates in two modes. In the
capture mode, it reads the configuration of a storage array controller
and records it in a configuration file. In the input mode, it writes the
configuration to the target server. This archive is extracted to /sbin/
cpqacuxe and a structure under /opt/compaq/cpqacuxe.
The EFI boot manager utility, which loads EFI applications (such as
the OS boot loader) and EFI drivers. The EFI boot manager allows you
to control the server's boot environment using variables stored in
NVRAM.
The HP Array Configuration Utility Command Line Interface (HP
ACU-CLI) is a command-line based disk configuration tool that can
be used to configure and manage Smart Array Controllers and RAID
Array Controllers in Integrity Linux environments.
The hpia64info utility, which displays information about Management
Processor and system firmware.
The hardware discovery utility, which creates an inventory of the
server and writes this data to a file.
The hardware query utility, which reads the file created by the
hardware discovery utility and provides this data in a usable form.
The if hardware utility, which makes user process decisions based on
data from the file created by the hardware discovery utility.
Unpacking the Toolkit 31