Panasonic WV-CW504SE Installation Manual page 20

w Engage the attachment mounting screw of
the camera with the camera mounting hole
of the camera attachment and rotate the
camera in the direction of the arrow to the
"LOCK" position to secure the camera to
the camera attachment without any back-
lash.
e Connect the power cord and the video
output cable at the side of the camera
mount bracket. (+ page 29)
Apply waterproof treatment to the con-
nected section. (+ page 27)
r Accommodate the connected cables
inside the cable guide of the camera
mount bracket.
Important:
• To prevent the cables from being caught
when the cover is attached, keep the
cables inside the cable guide.
20
Projection
Cable guide
Connected cable
Make cable
connections.
Cable guide