Table of Contents
Advertisement
>
Scanning Guide
On-screen Manual
Scanning Film
This machine supports 35 mm positive and negative film strips (standard state of developed film, with
six frames in each strip) as well as 35 mm mounted positive slides (one frame per mounted slide).
Up to twelve film strip frames or four mounted slide frames can be scanned continuously.
Note
To scan 120 Format Films, scan from the Advanced Mode tab of ScanGear (scanner driver).
To scan at a resolution higher than 4800 dpi, scan from the Advanced Mode tab of ScanGear.
Scanning Film in Advanced Mode
35 mm Film Strip
1.
Place the film on the Platen.
Placing Film
2.
Start MP Navigator EX and open the Navigation Mode screen.
Starting MP Navigator EX
3.
Point to Scan/Import and click Film.
4.
Click Specify... to set the document size and scanning resolution as required.
When setting is completed, click OK.
Scan Settings Dialog Box (Film)
Important
Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to
Auto. In that case, select the type of film in Film Type and scan again.
>
> Scanning Film
Let's Try Scanning
35 mm Mounted Slides
Advertisement
Table of Contents
