Canon 4207B002 On-Screen Manual page 312

5.
Click (Crop) and adjust the cropping frame to the desired size.
6.
Click Scan.
Starts scanning.
Check 3: Check if there are frames that are not cropped even when the
whole film image is displayed.
On the Advanced Mode tab of ScanGear, click
film image. Cropping frames appear on automatically detected frames. If the frame you want to scan is
not cropped correctly, select the size of the film to be scanned from Scan Area and click
Cropping Frame). If the frame is still not cropped correctly, adjust the cropping frame. See the procedure
in Check 2 to 6 to adjust the cropping frame.
(Film Thumbnail) on the Toolbar to display the whole
(Film
Page top