>
Scanning Guide
On-screen Manual
in Basic Mode
Scanning in Basic Mode
In Basic Mode, you can scan easily by following the on-screen steps.
This section explains how to scan a single document and how to scan color film.
See
"Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
documents at one time.
See
"Scanning Film in Advanced Mode
Important
The following types of documents may not be cropped correctly. In that case, click
on the Toolbar to switch to whole image view and scan.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
The following types of documents cannot be cropped correctly.
- Documents smaller than 1.18 inches (3 cm) square
- Photos that have been cut to various shapes
1.
Place the document or film on the Platen, then start ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow (alignment mark) of the Platen. See "
place film.
2.
Set Select Source according to the document or film placed on the Platen.
Note
>
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
" to scan black and white film or 120 Format Film.
> Scanning
" to scan multiple
(Thumbnail)
Placing Film
" for details on how to