Axis 2400 - PHP3 GUIDE Manual page 52

Appendix C - PHP3 Script Examples
There is no need to edit anything below this line.
error_reporting(0);
function conv($value)
{
if($value < 10) {
$value = "0$value";
}
return strval($value);
}
for($c=0;$c<(strlen($sources));$c++)
{
$command="bufferd -start -buffername ";
$command.=$buffer_prefix.substr($sources,$c,1);
$command.=" -snapshot -pre 1 -predelay ";
$command.=strval($delay);
$command.=" -uri ftp://jpg/";
$command.=substr($sources,$c,1);
$command.="/";
$command.=$image_format;
$command.=".jpg -format ";
$command.=$file_format;
system($command);
}
$session = ftp_connect($ftp_server, $port);
if($session)
{
if(ftp_login($session, $user, $pass))
{
if (!ftp_pasv($session, $passive_mode == "yes"))
{
}
else
Axis Communications AB does not provide support for application development of any kind. The
information here is provided "as is", and there is no guarantee that any of the examples shown
will work in your particular application.
Revision 0.9 May 2001
ftp_quit($session);
error_log("Could not set passive mode",0);
$start_time = gettimeofday();
$current_time = $start_time;
$session_time = 0;
$inc = 0;
$active_buffer = -1;
$failures=0;
// A function for converting
//single digit integers into
//two digit integers
// Start the buffers as
//specified by the parameters
//above
// Connection successfully
//established
// Successful login attempt
// Passive mode successfully
//set
51