Table of Contents
Advertisement
False Alarm Control Technology (FACT
refer to the FACT
explanation of how FACT
grammed off, the security system will respond to inputs from
any sensor indefinitely.
n n o o t t e e : : Because many states have laws regulating security systems, pro-
gramming FACT II off may cause your system to violate state laws.
Siren tones and chirp volume: The output of the siren con-
sists of six different tones in sequence. Any of these tones
can be eliminated by your dealer, resulting in a unique, eas-
ily identifiable siren sound. The siren chirps can be either full
volume or 6 decibels quieter than the full alarm blast.
manual programming instructions
Be sure to document changes by taking note of all feature changes
made in programming mode.
To enter the User Selectable Features programming:
1.
Ignition on - Turn the ignition to the run position or start the
engine.
2.
Enter PIN - Enter the factory preset PIN code of 2 by press-
ing
on the PlainView 2 Valet switch twice, then
once.
n n o o t t e e : : If the factory preset PIN has been changed, the new PIN must
be entered.
20
II
) on or off: Please
II
section of this guide for a complete
II
operates. If FACT
II
is pro-
Hide quick links:
Advertisement
Table of Contents
