arm/disarm diagnostic chart
Action
Chirps
Arm
2
Arm
4
Arm
2 (5 sec.) 4
Arm
2 (10 sec.) 4
Disarm
1
Disarm
3
Disarm
5
table of zones
The zone number is the number of LED flashes used by the system to
identify a specific input. The standard input assignments are listed
below, along with spaces to write in any optional sensors or switches
you have had installed. If the Warning Zone response is triggered, the
LED will not report it.
Zone - Number
of LED Flashes
3
4
5
7
8
10
16
Light Flashes
Description
2
System armed
4
System armed with hood/
trunk active and bypassed
(zones 5 and 6)
2 (5 sec.) 4
System armed with door
active and bypassed (zone 4)
2 (10 sec.) 4
System armed with sensor
active and bypassed zones
3 and 8
1
System disarmed
3
System disarmed with
tamper alert
5
System disarmed with low
battery warning
Dealer-Installed
Description
Options
Instant trigger - a heavier
impact detected by the
shock sensor
Door switch trigger
Instant trigger - often used
for hood/trunk pinswitches
Ignition trigger
Instant trigger - for optional
sensors
System Power Reset